EURO < CHOOSE YOUR LANGUAGE  

Tips & Tricks

SPECIFICATION OF AN IMAGE FOR THE START DISPLAY

You can specify a photographic image for the start display, which always appears for two seconds on the monitor screen when you switch on the camera and the mode select is set to "REC".

JUST FOLLOW THESE STEPS

Press [MENU] in the acquisition mode or the replay mode.
Select the "Settings" register, select "Start" and then press .
Use and to display the image you want to use for the start display.
Use and to change settings, then press [SET].
To execute this: Select this:
Using the current displayed image as the image for the Start display On
Deactivating the Start display Off
You can select one of the following image types as the Start display.
The internal Start display of the camera
An audio snapshot acquired with the camera
An audio snapshot that you have acquired with the camera
A film with a size of 200 kB or less, exposed with the camera
The snapshot or film image which you have selected as the Start display is stored in a special memory area, designated the "Start display memory". Only one image can be stored at a time in the Start display memory. Selecting a new Start display therefore overwrites the image previously stored in the Start display memory. You must then store a separate copy of an image to the normal camera image memory if you want to return to a previous Start display.
 
The Start display is erased during the formatting operation.

If you store an audio snapshot to the Start display memory, the image sound is not reproduced when the image is displayed at the start.
Back


Camera adviser
EXILIM Accessory
BEST SHOT
schließen

Bookmark via: